Oct 2019

All Copy Products Celebrates Grand Opening of New Headquarters

The opening of the new All Copy Products Headquarters marks a continuation of the big and bold thinking that has been the trademark of this office solutions provider for the past two decades. Since 1999, when the company was purchased by current CEO and President Brad Knepper, the company has grown from a single office with seven employees to nine regional offices and over 350 employees. Given its rapid growth and expansion into new service areas, All Copy Products wanted to bring its Denver workforce together into a headquarters that would support its collaborative culture and allow for future growth. Working closely with Bryan Construction, MOA ARCHITECTURE looked to All Copy Products’ explosive growth and forward-thinking attitude as an influence on the design of the new headquarters.

The area’s unique character proved to be a major influence in the design of the building’s exterior. Located in the industrial, underdeveloped northwest corner of Denver’s Lincoln Park neighborhood, the site is a mere stone’s throw (or scooter’s ride) from Downtown Denver. With an industrial and manufacturing presence that goes back over a century, the area presents a gritty and unpolished side of Denver ripe for growth and development. Honoring the industrial heritage of the area while also looking to the future, the progressive style of the new headquarters plays with concrete forms, elegant metal paneling, and electrochromic glass.

“Given the building’s visibility along Colfax Avenue, we knew it was important to give it a real presence,” says Eric Vogel, Director of Design at MOA. “The projecting glass volumes, in combination with the vertical and horizontal metal panels, give the façade a real sense of drama and movement.”

Despite its promising location close to downtown, the site was not without its challenges. One issue that emerged early in design was the environmental covenants protecting the site, which restrict the excavation and disturbance of contaminated soils. Because the environmental covenants made below-grade parking unfeasible, MOA developed a scheme incorporating an above-ground, structured parking podium for 220 vehicles directly into the building massing, which still allows for convenient connections to the lobby, offices, and warehouses.

“We are really proud of how we worked with the environmental covenants,” says Bret Kudlicki, architect at MOA, who managed the project. “It’s so important to find ways to creatively design and build on these brownfield sites that are close to the downtown core.”

The interior program of the building was crafted to serve All Copy Products’ unique corporate structure and business needs. A key design driver was the need for a compelling “tour route,” providing prospective clients with a strong introduction to All Copy Products and its featured products and services.

“We understood how crucial client tours were to All Copy’s business model,” says Vogel, “so we worked closely with their leadership to understand the structure of these tours and generate an intuitive narrative through the design of these spaces.”

The two-story lobby with its grand staircase serves as a dramatic start to the tour route, which leads clients through three separate showrooms, with the final room on the second floor offering a view into the building’s massive warehouse space, emphasizing the breadth of the company’s operations. The final stop of the tour is a window looking into the company’s dispatch center for their external IT services division.

Understanding employees’ preferred working styles and the company culture, the design team sought to provide the building with a wide variety of working and collaboration spaces along with a rich selection of amenities. The office floors include working environments that range from larger meeting spaces to huddle rooms to more private work settings away from workstations. Building amenities include a fitness area and an employee lounge on the fifth floor, which opens out onto a balcony with stunning views of the Front Range and Downtown Denver. The building also emphasizes the importance of daylighting to user comfort, with one of the Denver metro area’s largest installations of electrochromic glass, which regulates the amount of sunlight let into the building and eliminates the need for manual blinds. With the surrounding area in the midst of a historic transformation, the new All Copy Products Headquarters is emblematic of Lincoln Park’s larger ambitions, a striking example of what’s in store for the neighborhood.

Sep 2019

Deer Trail Celebrates Opening of New PK-12 Campus

With an aging and outdated school facility—parts of it nearly a century old—the Town of Deer Trail was overdue for a new school. Last week, School District 26J welcomed students into an entirely new facility—the first time the community could make such a claim since its heyday in the early 1920s. MOA ARCHITECTURE led the design of the project and Fransen Pittman served as general contractor.

The new Deer Trail PK-12 School is a 74,250-SF facility, which spans Pre-Kindergarten to 12th grade and includes vocational technology classrooms and labs, athletics, commons, administration space and offices, music suite, and multi-purpose performance space. While the facility brings together the entire student population in a single building, it separates primary from secondary school functions even within shared spaces, such as the commons. The two classroom wings split grade levels into different floors and create open, collaborative spaces between the classrooms. 

The opening of the facility is well-timed for Deer Trail, as the town experiences steady population growth, driven in part by the outward expansion of the nearby Denver metro area. A new 150-home housing development directly adjacent to the campus epitomizes the area’s ongoing growth. 

For this small, rural community, which is located 60 miles east of Denver along the I-70 corridor, the new facility will be more than a school. Housing the new Davies Public Library and providing after-hours access to the fitness center as well as other multi-purpose spaces, the facility will be a true community center. A ribbon-cutting ceremony prior to the District’s back-to-school night gave the community a chance to explore the new building. 

Given the importance of the project to the town, the community was closely involved in the planning and design stages of the campus. 

“We always bring the community into our design process for schools,” said Eric Vogel, design principal at MOA. “But for this project, we knew how key it was to really integrate their thinking into this process, knowing how much use the facility would get from the community.”

For over a century, the area around Deer Trail has been a center for agriculture, with an economy based in farming and ranching. The importance of related trade skills to the area informed the design of the facility’s Career & Technical Education (CTE) program, which includes an agriculture laboratory, as well as welding and construction trade laboratories. The program will give students a path to graduation that offers them both a high school diploma and marketable trade skills.

The overall design of the facility offers an open and welcoming presence to the community it serves. Forming the north edge of the courtyard at the school’s main entrance, the classroom wings feature a dramatic profile, with a soaring skillion roof that shelters the second-floor learning commons. Glued laminated timber (glulam) roof beams support the roof, with the ends of the beams extending beyond the edge of the projecting eaves. A south-facing curtainwall clerestory runs underneath the eaves of the skillion roof, pulling daylight into the commons area throughout the day, while the projecting eaves to the west protect the curtainwall glass exterior below from excessive sun in the late afternoon. The building exterior deploys a mixture of durable, low-maintenance materials, including concrete block, brick, and other masonry products, with metal panel at higher elevations.  

The new PK-12 campus was made possible by a $28 million grant from the State Board of Education’s Building Excellent Schools Today (BEST) program, with the remainder of the facility’s $36.2 million budget raised through a bond issue to the community. Designed to achieve Collaborative for High Performance Schools (CHPS) certification, the building features several sustainable design strategies, including low-use water fixtures, extensive daylighting, and natural ventilation.

Aug 2019

Mayor Hancock Celebrates Groundbreaking of New Ricardo Flores Magón Academy

DENVER, CO (July 28, 2019) – After eight years of operation in inadequate facilities, Ricardo Flores Magón Academy (RFMA) has the opportunity for a fresh start. With Mayor Michael Hancock on hand, the RFMA community celebrated the groundbreaking of a new K-8 facility just north of Denver’s Regis neighborhood. MOA ARCHITECTURE is the architect for the new facility, with Fransen Pittman serving as general contractor and Vanir Management as owner’s representative.

The new building is made possible by a $15.5 million grant from the State Board of Education’s Building Excellent Schools Today (BEST) program. The grant was part of the 2018 BEST program, which marked the largest award given by the State in the program’s history. The 2018 program was also notable for grants given to charter schools for major construction projects, including RFMA’s new facility. In previous grant cycles, awards to charter schools accounted for around 1% of total awarded funds; the 2018 grant application marked the third attempt by RFMA to secure funding for a new facility.

The groundbreaking ceremony was held on the site for the new building, directly north from the existing RFMA facilities. Attended by over 100 members of the RFMA community, students were the stars of the ceremony, with high-achieving students taking hold of ceremonial spades to do the honorary groundbreaking, flinging dirt high into the air. (Some of which landed on an amused and appreciative crowd.) Remarks were given by Mayor of Denver Michael Hancock; Dr. Terry Croy Lewis, Executive Director of Colorado Charter School Institute; John Pittman, President and CEO of Fransen Pittman; and Jorge Castañeda, an immigration lawyer who serves as an RFMA board member. 

Mayor Hancock framed the construction of the new school as an opportunity to correct educational imbalances in the region, including the neighborhoods of North Denver. 

“It is my hope that this new facility opens new horizons for the right students and welcomes them here every day,” said Mayor Hancock. “This is about fixing inequities in our education system. It is paramount to fix these inequities that remain in several aspects of our lives and in our communities.”  

Dr. Croy Lewis touched on the inadequacies of the charter school’s existing facilities in her remarks and commended the community for its tenacity in the face of these challenges.

“I would walk your hallways, and I would go in your classrooms and I saw students and teachers working incredibly hard in a facility that no one deserved to be in,” said Dr. Crow Lewis. “But all of you didn’t let it stop your success.” 

Founded in order to provide high-quality education in one of the region’s lowest-income neighborhoods, RFMA has won accolades for its educational results and community focus. Serving a largely Mexican-American student population, the charter school emphasizes the importance of cultural heritage, with the school’s Mexican revolutionary namesake, Ricardo Flores Magón, held up as an example of how someone can forge social change through their intellect. RFMA students are known as “Magonistas” in honor of this namesake. 

“We have worked closely with parents, faculty, and community members to ensure that the design reflects the community,” said Chas Marquez, one of MOA ARCHITECTURE’s architects who worked on the project. “The final design acknowledges the community heritage with a focus on performance and gathering spaces, including the expansive commons area and learning stairs.” The resulting facility comprises 32,700 SF of space, including classrooms and learning environments for kindergarten through 8th grade, gymnasium, administration areas, and a cafeteria/commons area opening onto a “learning stair,” which will function as the heart of the school. The facility will be under construction over the next year, with an opening set for next fall. 

May 2019

MOA announces new hires

From L to Right: Heather Lamberson, Dane Steil, and Jamie Marchini.

MOA ARCHITECTURE is pleased to announce that Heather Lamberson, Associate AIA, Dane Steil, and Jamie Marchini have joined the firm as Architectural Designers.

Heather Lamberson joins MOA as a team member of the firm’s growing Healthcare Design Studio. She brings 5 years of experience on healthcare projects, including multiple projects for Kaiser Permanente and the University of Colorado Hospital’s Anschutz Medical Campus. Heather is an Associate AIA member and holds a Master of Architecture from the University of Colorado Denver and a certificate in Classical Architecture.

Dane Steil joins the firm as an Architectural Designer whose focus has been on K-12 education projects, including the new Chinook Trail Middle School, a collaboration between MOA and RTA Architects. Dane obtained his Bachelor of Architecture from the University of Oklahoma.

Jamie Marchini joins the firm from NBBJ Design’s San Francisco office, where she focused on healthcare and bioscience projects. Jamie holds a Bachelor of Design and a Master of Architecture from the University of Florida. She was the recipient of MOA’s 2017 Robert L. Outland Women and Minority Scholarship Award + Summer Internship, spending the summer of 2017 working in the firm’s Denver office and contributing to several projects.